Ata Chapter List?

What are ATA chapters?

ATA chapters are number system with corresponding chapter name and subtopics as the general aircraft operations. For instance, ATA 05 sets the time limit and maintenance checks standard for aviation practices. ATA chapters are useful references on the overall aircraft operations.

How many chapters does ATA have?

The ATA 100 chapters refers to the numbering system and referencing standards for commercial aircraft documentation. Through the 100 chapters, different systems and procedures of aircraft are detailed, allowing personnel to understand certain areas of commercial aircraft quickly and easily.

What are the ATA 100 system codes?

ATA Chapters, also known as the ATA 100 System Codes, refers to the categorization of parts as organized by the Air Transport Association. These numbers will typically be found in any Component Maintenance Manual (CMM) for any civilian aircraft and one category can consist of several subcategories for different parts.

What is CC and SS in ATA numbering?

The ATA chapter format is always CC-SS where CC is the chapter and SS the section, see ATA extended list section below for details.

What is ATA 31?

SYSTEM. AURAL WARNING. ISSUE 3. DASSAULT AVIATION Proprietary Data.

What is a ATA code?

ATA chapters (sometimes called “ATA 100 System Codes”) are a way of categorizing the various systems that are on a plane, originally created by the Air Transport Association in 1956. Look at any Component Maintenance Manual (CMM) for any civilian aircraft.Feb 10, 2016

What is ATA 32?

The ATA 32 landing gear control units contribute to the optimum control of all landing gear parameters during taxiing, take-off and landing phases.

What is the difference between ATA 100 and iSpec 2200?

iSpec 2200 ATA was designed to deliver monolithic manuals in SGML format while S1000D organizes the content into Data Modules to deliver the content in thousands of small XML files that are much easier to use and organize as desired.

What are the 3 major axis of an aircraft?

Regardless of the type of aircraft, there are three axes upon which it can move: Left and Right, Forwards and Backwards, Up and Down. In aviation though, their technical names are the lateral axis, longitudinal axis and vertical axis.

What is ATA chapter20?

ATA Chapter 20 is the designated area for manufacturers to publish information pertinent to Standard Practice. This may include, but is not limited to, aircraft cleaning, torque values, plumbing installation and bonding tests.Mar 31, 2000

What is a plane called?

airplane, also called aeroplane or plane, any of a class of fixed-wing aircraft that is heavier than air, propelled by a screw propeller or a high-velocity jet, and supported by the dynamic reaction of the air against its wings.

What ATA chapter is APU?

When used for air conditioning, the APU ECU controls the valve to obtain the desired temperature. ➢ For more information, refer to CODDE 1 / Chapter 02 / ATA 21. As the APU supplies electrical power to the airplane, APU electrical indications can be displayed in the ELEC synoptic.

What is ND in aviation?

The Navigation display screen displays the lateral navigation status of the aircraft. The latest navigation displays are also able to display the vertical flight profile.

What is MCR in aviation?

In aerodynamics, the critical Mach number (Mcr or M*) of an aircraft is the lowest Mach number at which the airflow over some point of the aircraft reaches the speed of sound, but does not exceed it.

What is SL in aviation?

SL. SERVICE LETTER. Letter, Aircraft, Technology.

What is the purpose of ATA iSpec 2200?

The objective of iSpec 2200 is to minimize cost and effort expended by operators and manufacturers, improve information quality and timeliness, and facilitate manufacturers’ delivery of data that meets airline operational needs.

What ATA chapter is thrust reverser?

Hydraulic Thrust Reverser ATA-29.

What is the most current version of ATA specifications called?

ATA 2300 was first introduced in 2009, then amended in 2011. This ATA standard is therefore quite recent, which is why it takes all current technology into account. It provides schematics and operating rules for the production of flight manuals – also called Flight Ops (Flight Operations Manuals).

Who approves an Mel?

The MEL is approved by the operator’s national airworthiness authorities. An operator may not operate an aircraft which does not comply with the approved MEL, except with the explicit permission of the Appropriate Regulatory Authority, usually the NAA.

Why is ATA chapters important?

ATA chapters make it easy to categorize technical information. Looking at any Component Maintenance Manual (CMM) for any civilian aircraft. At the bottom of every single page is the ATA chapter for that manual. The unique aspect of the chapter numbers is its relevance for all aircraft.Jun 25, 2021

What are ATA chapters used for?

ATA chapters are a numbering which is a common referencing standard for commercial aircraft documentation published by ATA (Air transportation Association). ATA chapters makes it easy to categorize technical information and uniformity in presenting for All manufacturers of aircraft and its components.Dec 20, 2015

What type of inspection must be performed when aircraft has a hard landing *?

Hard or Overweight Landing Inspection

The hard landing inspection is done when hard landing takes place at or below the maximum design landing limits. An overweight landing inspection is done when an aircraft lands at a weight beyond the maximum landing weight limit.Sep 9, 2020

What is an ATA 106?

ATA Spec 106 outlines and identifies some procedures that the airlines and/or suppliers, buyers and quality assurance/control inspectors could follow in approved parts quality assurance programs.

What year were ATA 100 and ATA 2100 combined?

In 2000, ATA Spec 100 and ATA Spec 2100 were incorporated into ATA iSpec 2200.

Which letter Checks are the most comprehensive?

The D check, sometimes known as a “heavy maintenance visit” (HMV), is by far the most comprehensive and demanding check for an airplane. This check occurs approximately every 6-10 years. It is a check that more or less takes the entire airplane apart for inspection and overhaul.

What are the 2 types of stability?

Two Types Of Stability

Stability is the ability of an aircraft to correct for conditions that act on it, like turbulence or flight control inputs. For aircraft, there are two general types of stability: static and dynamic.Mar 26, 2015

What are the 6 motions of flight?

An airplane rotates in bank, pitch, and yaw while also moving horizontally, vertically, and laterally. The four fundamentals (straight-and-level flight, turns, climbs, and descents) are the principle maneuvers that control the airplane through the six motions of flight.

Why is it called yaw?

The term yaw was originally applied in sailing, and referred to the motion of an unsteady ship rotating about its vertical axis.

What is ATA full form?

Advanced Technology Attachment (ATA) is a standard physical interface for connecting storage devices within a computer. ATA allows hard disks and CD-ROMs to be internally connected to the motherboard and perform basic input/output functions.

What are the ATA chapters available in the aircraft structural repair manual?

What does ATA chapter mean in aviation?

Air transportation Association (ATA) published a numbering system to learn and understand the technical features of an Aircraft. ATA chapters make it easy to categorize technical information. Looking at any Component Maintenance Manual (CMM) for any civilian aircraft.Jun 25, 2021

What does ATA mean in airport?

2.2 Actual Time of Arrival (ATA)Jun 14, 2021

What is the difference between ATA 100 and iSpec 2200?

iSpec 2200 ATA was designed to deliver monolithic manuals in SGML format while S1000D organizes the content into Data Modules to deliver the content in thousands of small XML files that are much easier to use and organize as desired.

What is the ATA chapter for wings?

HEICO – ATA Chapter 57 – Wings.