Getting Rid Of Artex Ceiling?

Advertisement

Is it safe to remove Artex ceiling?

Contact your local council if you need help with this. Once confirmed that the artex® does not contain asbestos fibres and it can be removed safely with no risk there are a number of different ways that artex ceiling removal can be done. Firstly it can be “steamed” off using a wallpaper steamer.

Should I remove Artex or skim over?

It is standard practice to just skim over the artex. If the artex is pre mid 1980’s there is a chance it may contain asbestos, albeit in very small amounts and not the really bad variety.

Advertisement

How do you flatten an Artex ceiling?

Using the spatula, load the smoother with Artex Easifix Smooth-It. Apply an even coat with firm, sweeping strokes. When the whole surface is covered, allow to dry until firm to the touch. Repeat the process as many times as required to reach the desired smoothness.

Advertisement

Is it OK to buy a house with Artex ceilings?

Asbestos Artex doesn’t have to be removed when buying or renting a house or commercial property. Remember, Artex can also be ‘over boarded’ or ‘skimmed over’ with other none asbestos products and can be hidden from view. This happens in residential and commercial properties alike.Feb 25, 2022

Advertisement

Does Artex devalue house?

Now, Artex ceilings can actually devalue a house. It’s very difficult to match up new repairs onto old Artex patterns. Undamaged and painted Artex is usually harmless. However, many people don’t like asbestos–based building materials in their home and will take any opportunity to remove it.

Advertisement

Are Artex ceilings out of fashion?

As of 2020 Artex is still sold, but the textured ceiling finishes are much less popular.

Advertisement
Advertisement

Can you remove Artex yourself?

If you have plenty of time, steam can remove Artex.

Move your steamer slowly but steadily along the area of Artex you want to remove. Do not leave the steamer in any one spot for too long. This could damage the wall behind the Artex. Once the Artex is damp from the steam, remove it using a handheld scraper.Aug 22, 2019

Advertisement
Advertisement

Is it OK to plaster over Artex?

Plastering over artex is no different to normal plastering – but it is one of the hardest aspects of skimming. First you need to decide if it will be easier to first apply a base coat. If the highest point of the artex is 5-10mm then it will be easier to apply a base coat of ‘Bonding Coat’ to the surface.

Is it safe to skim over asbestos Artex?

Skimming Over Artex.

Advertisement

We wouldn’t recommend scraping artex with asbestos in it, even with masks. If you have patterned Artex, it’s possible to coat it with PVA to achieve a flat surface, and then skim it. Stippled Artex can’t be treated effectively in this way.

Advertisement

How do professionals remove Artex?

Artex can be removed in several ways, but the two most popular are using steam and with an external product – or, in some cases, you can opt to plaster over the surface if it doesn’t contain asbestos.Jun 13, 2022

Advertisement
Advertisement

When was asbestos stopped being used in Artex?

Although asbestos-containing Artex ceased production in the UK in 1984, it took until 1992 for its use to be formally prohibited by EU and UK legislation. However some usage continued even though it was prohibited. This was mainly due to using up of held stock.

How do you change a textured ceiling to smooth?

How to do it

Advertisement
Advertisement
  • If the textured ceiling hasn’t been painted, use a spray bottle filled with room temperature water to lightly dampen small sections – don’t overdo this or you’ll make your ceiling itself wet and heavy! …
  • Use a drywall scraper to chip and scrape away the texture to create a smooth surface.
  • More items…•Oct 16, 2019

    Advertisement

    Can you plasterboard over Artex ceiling?

    The good news is if the coating/Artex is in good condition then it is safe to apply a sealant, skim over it with a new layer of plaster or cover the coating with new plasterboard. You can plasterboard over the ceiling as it it as long as you locate joists accurately and screw the plasterboards to the joists.

    Is Artex the same as plaster?

    Artex differs from plaster because it is a surface covering intended to give a textured, patterned finish so it enables a wall or ceiling to be finished without fine plastering skills if you don’t want a uniform pattern.May 23, 2019

    Advertisement
    Advertisement
    Advertisement

    Do you have to declare asbestos when selling UK?

    Can you sell a house with asbestos? No – it isn’t illegal to sell a house that contains asbestos in the UK, although as of 2013 and the Property Misdecriptions Act you are legally obliged to disclose that there is an asbestos presence during the sale.

    Can you get a mortgage on a house with asbestos?

    A house that has a roof containing asbestos is usually less of an issue for most lenders compared with properties where asbestos is part of the core fabric of the building. Many lenders will approve a mortgage application if the roof itself isn’t damaged and is in good condition.Jul 31, 2022

    Advertisement
    Advertisement

    Are swirl ceilings outdated?

    A. Swirl ceilings are still installed today because they are less expensive to do than a smooth finish.Aug 30, 2017

    Is Artex the same as textured paint?

    Artex is a trade name for a type of textured coating commonly found on walls and ceilings in homes and businesses throughout the UK. It was applied throughout the 70’s and 80’s, and a similar form of textured coating is still used today.

    Advertisement

    Can you paint over Artex?

    Yes you can paint over Artex. the best way to paint it is. If Artex has never been painted before use a stiff sweeping and just brush the ceiling to get rid of the sharp edges first as they will only get in your paint when you start painting. Then using a thick pile roller paint as normal.

    Advertisement

    Can you Artex over Artex?

    Yes, 2 coats for definite over artex – 1 to flatten out to the highest point and then one thin one over the top. Make sure you apply PVA first, the more coats of this you put on the less the moisture will be sucked out of artex.

    Advertisement
    Advertisement

    Does woodchip wallpaper devalue a house?

    If you still have woodchip wallpaper or artexed walls this could certainly devalue you property as it isn’t in fashion any more and it can be fairly costly to remove it and have the walls plastered smooth again.Jul 19, 2019

    Advertisement

    What can you do with Artex ceilings?

    If it’s time to bid farewell to your artex ceiling, there are five ways you can remove it: ‘Scrape and Sand’, ‘Cover with Plasterboard’, ‘Wet Plaster Over’, ‘Steam, Scrape and Sand’ or use ‘Eco Solutions X–Tex’. The best option for you depends on many things, including the age and condition of your ceiling.

    Advertisement

    How do you remove asbestos from Artex ceiling?

    There are two ways in which this is completed. One is through the application of steam which gently removes the asbestos Artex along with hand scraping. The other is through chemical gel application which when left to soak allows the asbestos Artex to be scraped away. Both ways are messy and time-consuming procedures.

    Can you cover Artex with wallpaper?

    I wouldn’t recommend it. There’s far too much air and space under where the artex textures are. So it easily moved over time. If you can, then I advise either giving it a lick of paint or getting a plasterer in to skim it.Jul 12, 2015

    Advertisement
    Advertisement

    Can you overboard A asbestos ceiling?

    Do not overboard it as you will disturb the asbestos, you will have to get a specialist contractor in to do it. You could possibly skim rite over the artex but don’t scrape it.

    Is most Artex asbestos?

    Although the exact quantity will vary from product to product, artex and other textured coatings usually only contain very small amounts of asbestos (normally between 1-4%).Jun 25, 2019

    Advertisement
    Advertisement
    Advertisement

    Can you remove Artex yourself?

    If you have plenty of time, steam can remove Artex.

    Move your steamer slowly but steadily along the area of Artex you want to remove. Do not leave the steamer in any one spot for too long. This could damage the wall behind the Artex. Once the Artex is damp from the steam, remove it using a handheld scraper.Aug 22, 2019

    Advertisement

    How do you remove asbestos from Artex ceiling?

    There are two ways in which this is completed. One is through the application of steam which gently removes the asbestos Artex along with hand scraping. The other is through chemical gel application which when left to soak allows the asbestos Artex to be scraped away. Both ways are messy and time-consuming procedures.

    Advertisement

    When was asbestos stopped being used in Artex?

    Although asbestos-containing Artex ceased production in the UK in 1984, it took until 1992 for its use to be formally prohibited by EU and UK legislation. However some usage continued even though it was prohibited. This was mainly due to using up of held stock.

    Advertisement

    Can you plaster over Artex that contains asbestos?

    Testing Artex for Asbestos

    Asbestos was originally added to plaster to create the texture for patterning. This practice became unlawful in 1999, but ceilings created prior to that probably contain asbestos. It’s important to find out because plaster containing asbestos needs to be removed by licensed specialists.

    Advertisement
    Advertisement
    Advertisement
    Advertisement